Hyperoxsan

This product is also available in our following ranges: Livestock | Dairy

A Potent Heavy Duty Drinking Water Sanitiser to Effectively Remove Organic Deposits in the Drinking Pipeline System

Non-foaming
Broad spectrum activity against bacteria, fungi, yeast & moulds
Sanitisation and protection without abrasion or taint
Food-safe sanitiser for all food contact surfaces
Non-corrosive: suitable for use on all surfaces
No withdrawal period, non-toxic to animals & users at use dilutions
Readily biodegradable

Applications

A 50% stabilised hydrogen peroxide biocide blend to achieve high standards of water sanitisation in food & poultry industries (hatcheries, poultry farms, slaughterhouses & food processing plant).

Directions for Use

Cleaning a non-operating drinking water system where livestock is not present:

Place the dosage pump filter directly into a container with a 1-3% Hyperoxsan dilute solution. Ensure that air in the system is free released and is followed through by the Hyperoxsan water solution. The cap at the end of the system can be removed to check for a fizzing effect in the solution to ensure that the solution has reached the end. Raise all the nipples and cups. Allow the system to be fully flooded with the Hyperoxsan solution for period of 12 hours. Flush the whole system with clean water (ensuring that the nipples and cups are raised) to eradicate soiling out of the system.

Cleaning an operating drinking water system with livestock present:

The dosing pump should be set to dose an accurate 1% solution. Manufacture a stock solution/pre-mix with Hyperoxsan and water as detailed below. The Hyperoxsan solution can be added to the drinking system for 24 hours, for a period of 10 days.

	Day 1&2	Day 3&4	Day 5&6	Day 7-10
Water	Hyperoxsan	Hyperoxsan	Hyperoxsan	Hyperoxsan
10 L	100mL	150mL	200mL	250mL

Sanitising the drinking water pipelines/system:

Ensure that the system is clean and pipelines have been demineralised. Set your dosage pump or prepare a 1% Hyperoxsan solution. On a weekly basis, fill and flood all pipelines with a dilute solution for a period of 24 hours. A similar strength solution can be used to soak and sanitise the filter along with any other utensils and fittings.

Cleaning a non-operating system (no animals present):

Keep system flooded for 12 hour period. Flush system with clean water to remove residues.

3% for the first cleaning

1% for regular cleaning

Specification

Composition	Hydrogen peroxide
Appearance	Clear, colourless liquid
Odour	Characteristic – odourless to faint
pH value	1.5 – 3.0
Pack size	5 L, 25 L, 200 kg & 1000 kg IBC

The information contained in this data sheet is believed to be accurate, but customers are advised to ensure that the product is suitable for their own purpose before they use it.

5 Litres